Hicorpwell specialty multimode step-index fibers are designed for compatibility with the majority of fiber coupled,
single-emitter, diode-laser packages and support the diode laser power delivery market.
These power delivery fibers are available in 105/125 core/clad ratio in low and high NA versions.
SMA 905 connector, also known as FSMA connector, was one of the first fiber optic interconnect system
that gained industry wide acceptance. It has a screw coupling nut (threaded plug and socket) and holds a single fiber.
SMA fiber optic patch cord is usually multimode. SMA connector’s ferrule is traditionally
made of steel (tungsten carbide with copper-nickel alloy insert) although ceramic versions are also available.
SMA stands for Sub Miniature A. SMA 905 connector has a straight ferrule (3.14mm in diameter),
while SMA 906 connector has a stepped ferrule. (ferrule diameter step from 0.118” to 0.089”)
The stepped ferrule design allows an alignment sleeve to be used and therefore the
SMA 906 connection has lower insertion loss than SMA 905 connection.
Typical Applications :
Diode Pumping Systems,Free Space Optics,Medical Sensing and Imaging,Other Industrial Applications,
Power Transmission from Visible Through Near-IR,Printing,Raman Pumping,SM and MM Communications,
Use as Input Fiber in a Power Combine.Other fiber diameters are available upon request.
Specifications & Performances
| Item | Description |
| Numerical Aperture | 105/125/250um |
| Attenuation @850nm | <12dB/km |
| Numerical ApertureNA | 0.22+/-0.02 |
| Core Dia | 105+/-3.0um |
| Cladding Dia | 125+/-2.0um |
| Coating Diameter | 250+/-15um |
| Core/Clad Offset | <3.0um |
| Coating Concentricity | >80% |
| Clad Non-Circularity | <2.0% |
| Coating Material | Dual UV Acrylate |
| Working Temperature | -40℃to+85℃ |
| Short-Term Bend Radius | >5mm |
| Long-term Bend Radius >9mm | |
| Proof Test Level | 200kpsi |
